Toyota Tundra 2005 Service - Repair - Maintenance page 1976

SF−34
SFI (2UZ−FE) − FUEL TANK AND LINE
REMOVAL
1. PREVENT GASOLINE FROM SPILLING OUT
(See page SF−1)
2. REMOVE FUEL TANK CAP
3. REMOVE FUEL INLET PIPE SHIELD
Remove the 4 bolts and fuel inlet pipe shield.
B17586
4. REMOVE CHARCOAL CANISTER ASSEMBLY
(a) Remove the 4 bolts and charcoal canister assembly.
(b) Disconnect the pump module connector, vent hose and
purge line hose from the charcoal canister.
B17587
5. DISCONNECT SPEED SENSOR WIRE
Remove the nut and disconnect the speed sensor wire from the
fuel tank.
B17588
6. DISCONNECT FUEL MAIN TUBE AND RETURN TUBE
(See page SF−1)
B17589
7. REMOVE FUEL TANK ASSEMBLY
(a) Set up a transmission jack under the fuel tank.
(b) Remove the 2 nuts and disconnect the fuel pipe bracket
from the body.
B17590
SF1Y2−01