Toyota Tundra 2005 Service - Repair - Maintenance page 1898

SF−24
Nylon Tube
Nylon Tube
SFI (1GR−FE)
A23099
Tube Connector
O−ring Pipe
A23213
A23100
Tube Connector
O−ring Pipe
A23213
− INJECTOR
REMOVAL
1. PREVENT GASOLINE FROM SPILLING OUT
(See page SF−1)
2. DRAIN ENGINE COOLANT
3. REMOVE V−BANK COVER
4. REMOVE AIR CLEANER (See page EM−62)
5. REMOVE INTAKE AIR SURGE TANK
(See page EM−89)
6. DISCONNECT FUEL PIPE NO.1
(a) Remove the fuel pipe clamp.
(b) Pinch the tube connector then pull out the fuel pipe.
NOTICE:
S
Check if there is any dirt around the connector before
this work, because the quick connector has an O−ring
to seal the fuel pipe and fuel delivery pipe. Clean dirt
away if necessary.
S
Do not use any tool in this work.
S
Do not bend or twist the nylon tube.
S
Keep the plug free from foreign objects.
S
To protect the fuel pipe, cover it with a plastic bag af-
ter checking.
S
When the fuel pipe and fuel delivery pipe are stuck,
pinch the nylon tube with fingers, and turn it carefully
to free and then disconnect the fuel pipe.
7. DISCONNECT FUEL PIPE NO.2
(a) Remove the fuel pipe clamp.
(b) Pinch the tube connector and then pull out the fuel pipe.
NOTICE:
S
Check if there is any dirt around the connector before
this work, because the quick connector has an O−ring
to seal the fuel pipe and fuel delivery pipe. Clean dirt
away if necessary.
S
Do not use any tool in this work.
S
Do not bend or twist the nylon tube.
S
Keep the plug free from foreign objects.
S
To protect the fuel pipe, cover it with a plastic bag af-
ter checking.
S
When the fuel pipe and fuel pressure regulator are
stuck, pinch the nylon tube with fingers, and turn it
carefully to free and then disconnect the fuel pipe.
SF1YH−01