Toyota Tundra 2005 Service - Repair - Maintenance page 1936

Hide thumbs Also See for Tundra 2005:

Table of Contents

SFI (1GR−FE)

INSTALLATION

INSTALL KNOCK SENSOR

Install the 2 knock sensors with the 2 bolts so that the cen-

ter of the sensor comes within the range of 15° from the

bolt center as shown in the illustration.

Torque: 20 N m (204 kgf cm, 15 ft lbf)

Connect the 2 knock sensor connectors.

INSTALL WATER OUTLET PIPE NO.1

Install the water outlet pipe with the 3 bolts.

Torque: 9.0 N m (92 kgf cm, 80 in. lbf)

Install the 4 wire harness clamps.

CONNECT HEATER WATER INLET HOSE

INSTALL CYLINDER HEAD (See page EM−89)

KNOCK SENSOR