SF−32
Clamp
Clamp
(a)
Throttle Body Cover Bracket
SFI (2UZ−FE)
−
(m)
Connect the 8 injector connectors.
2.
INSTALL ENGINE WIRES
(a)
Install the 2 wire clamps on the engine wire to the brackets
on the RH delivery pipe.
(b)
Connect the engine wire clamps to the No.1 engine hang-
er and engine wire bracket.
(c)
Install the engine wire protector with the 2 bolts.
3.
CONNECT PCV HOSE TO PCV VALVE
B07534
4.
CONNECT VSV FOR EVAP TO UPPER INTAKE MAN-
IFOLD
(c)
(a)
Install the VSV for the EVAP to the upper intake manifold.
(b)
(b)
Connect the EVAP hose.
(c)
Connect the VSV connector for the EVAP.
5.
INSTALL THROTTLE BODY COVER BRACKET
Install the throttle body cover bracket with the bolt.
6.
INSTALL FUEL PRESSURE PULSATION DAMPER
(See page SF−1)
B16540
7.
INSTALL INTAKE AIR CONNECTOR
8.
INSTALL THROTTLE BODY COVER
INJECTOR