Debug Fip Snooping Rx - Dell S4810 Reference Manual

ifm
info
ipc
tx
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.2)
Version
8.3.19.0
Version
8.3.12.0

debug fip snooping rx

Enable debugging for FIP snooping receive-specific packets.
S4810
Syntax
debug fip-snooping rx packet-type [all | discovery | virtual-
link-instantiation | virtual-link-maintenance| vlan-discovery]
[interface]
Parameters
packet-type
FCoE Transit
Enter the keyword ifm for IFM-specific debugging.
Enter the keyword info for information-specific debugging.
Enter the keyword ipc for IPC-specific debugging.
Enter the keyword tx for packet transmit-specific
debugging.
Added the tx parameter.
Introduced on the S4820T.
Introduced on the S4810.
Enter the keyword packet-type and then the option type
on which to enable debugging. The options are:
• all — Enter the keyword all to enable debugging on all
the options.
• discovery — Enter the keyword discovery to enable
debugging on FCF advertisements and ENode
solicitation.
• virtual-link-instantiation — Enter the keywords
virtual-link-instantiation to enable debugging
on FLOGI, FDISC, and FLOGO packets.
• virtual-link-maintenance — Enter the keywords
virtual-link-maintenance to enable debugging on
FIP clear virtual link frames and keepalives.
661