Dell C9000 Series Reference Manual page 332

Networking command-line reference guide
Hide thumbs Also See for C9000 Series:
Table of Contents

Advertisement

in
out
Command Modes
EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.5.1.0
8.4.1.0
Usage information This command displays ingress or egress L2 access-list information based on a given
option.
If no ingress or egress access-list is attached to an interface, no information displays
and you return to the DELL# prompt.
Example
Dell#show mac access-lists in
Standard mac access list m1
seq 5 permit 11:22:33:44:55:66 count (0 packets)
Standard mac access list m2
seq 5 deny any order 2
seq 10 permit 00:33:00:11:00:77 33:44:55:66:77:88 count (0
For a Port Channel interface, enter the keyword port-
channel and then enter a number. The C-Series and S-
Series range is from 1 to 4096.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet and then enter the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE and then enter the slot/port information.
For a VLAN interface, enter the keyword VLAN followed by
the vlan id.
For a PE Gigabit Ethernet interface, enter the keyword
peGigE then the pe-id/stack-unit/ port-id information.
Display information of L2 ingress access-list configured to an
interface.
Display information of L2 egress access-list configured to an
interface.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4-port 40G line cards on ExaScale.
Introduced.
Access Control Lists (ACL)
332

Advertisement

Table of Contents
loading

Table of Contents