Permit - Dell C9000 Series Reference Manual

Networking command-line reference guide
Hide thumbs Also See for C9000 Series:
Table of Contents

Advertisement

The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0
7.6.1.0
7.5.1.0
6.2.1.1
Usage Information Prefix lists redistribute OSPF and RIP routes meeting specific criteria.
Related
show ip route list
Commands
show ip prefix-list summary

permit

Configure a filter that passes packets meeting the criteria specified.
C9000
Syntax
permit ip-prefix [ge min-prefix-length] [le max-prefix-length]
To delete a forward filter, use the no permit ip-prefix command.
Parameters
ip-prefix
ge min-prefix-
length
le max-prefix-
length
Command Modes
PREFIX-LIST
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Increased the name string to accept up to 140 characters. Prior
to 7.8.1.0, names are up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays IP routes in an IP prefix list.
— displays a summary of the configured prefix lists.
Specify an IP prefix in the network/length format. For example,
35.0.0.0/8 means match the first 8 bits of address 35.0.0.0.
(OPTIONAL) Enter the keyword ge and then enter the minimum
prefix length, which is a number from zero (0) to 32.
(OPTIONAL) Enter the keyword le and then enter the maximum
prefix length, which is a number from zero (0) to 32.
Access Control Lists (ACL)
354

Advertisement

Table of Contents
loading

Table of Contents