Examples
The following sample output shows the line-by-line style display when using the show
running-config acl-vlan-group option. Note that no group or access list names
are truncated.
Dell#show running-config acl-vlan-group
!
acl-vlan-group group1
description Acl Vlan Group1
member vlan 1-10,400-410,500
ip access-group acl1 out implicit-permit
!
acl-vlan-group group2
member vlan 20
ip access-group acl2 out
Dell#
Dell#show running-config acl-vlan-group group1
!
acl-vlan-group group1
description Acl Vlan Group1
member vlan 1-10,400-410,500
ip access-group acl1 out implicit-permit
Common MAC ACL Commands
The following commands are available within both MAC ACL modes (Standard and Extended) and do not
have mode-specific options. These commands allow you to clear, display, and assign MAC ACL
configurations.
The C9000 supports both Ingress and Egress MAC ACLs.
You can apply a MAC ACL on physical, port-channel and VLAN interfaces. The permit/deny statements in the
ACL determine how traffic on an interface, VLAN members, or port-channel members is handled.
clear counters mac access-group
Clear counters for all or a specific MAC ACL.
C9000 Series
Syntax
clear counters mac access-group [mac-list-name]
Parameters
mac-list-name
Command Modes
EXEC Privilege
(OPTIONAL) Enter the name of a configured MAC access list.
Access Control Lists (ACL)
328