Show File - Dell C9000 Series Reference Manual

Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.4
8.3.11.1
8.3.7.0
7.5.1.0
E-Series
Example
Dell#show bootvar
PRIMARY IMAGE FILE =
VG-1-0-0-4079.bin
SECONDARY IMAGE FILE =
VG-1-0-0-4046.bin
DEFAULT IMAGE FILE =
LOCAL CONFIG FILE =
PRIMARY HOST CONFIG FILE =
SECONDARY HOST CONFIG FILE =
PRIMARY NETWORK CONFIG FILE =
SECONDARY NETWORK CONFIG FILE =
CURRENT IMAGE FILE =
VG-1-0-0-4079.bin
CURRENT CONFIG FILE 1 =
CURRENT CONFIG FILE 2 =
CONFIG LOAD PREFERENCE =
BOOT INTERFACE GATEWAY IP ADDRESS =
Reload Mode =
Related
boot system
Commands

show file

Display contents of a text file in the local filesystem.
C9000 Series
Syntax
show file filesystem
From a PE console, use show file filesystem to view the contents of a text file.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Output expanded to display current reload mode (normal or
Jumpstart).
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Original command.
ftp://ftp:ftp@10.11.227.233/tftpboot/FTOS-
ftp://ftp:ftp@10.11.227.233/tftpboot/FTOS-
system://A
variable does not exist
ftp://ftp:ftp@10.11.227.233/tftpboot/FTOS-
flash://startup-config
variable does not exist
local first
normal-reload
— sets the location of Dell Networking OS image files.
variable does not exist
variable does not exist
variable does not exist
variable does not exist
10.11.93.254
File Management 220