dot1x port-control
Enable port control on an interface.
C9000 Series
Syntax
dot1x port-control {force-authorized | auto | force-unauthorized}
Parameters
force-authorized
auto
force-
unauthorized
Defaults
none
Command Modes
INTERFACE
INTERFACE (BATCH MODE)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
7.6.1.0
7.4.1.0
Usage Information The authenticator completes authentication only when port-control is set to auto.
Enter the keywords force-authorized to forcibly authorize a
port.
Enter the keyword auto to authorize a port based on the 802.1X
operation result.
Enter the keywords force-unauthorized to forcibly
deauthorize a port.
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
802.1X
252