Fcoe Priority-Bits; Iscsi Priority-Bits - Dell Force10 S4810P Reference Manual

Command Modes EXEC Privilege
Command History
Version 8.3.12.0
Version 8.3.16.0

fcoe priority-bits

Configure the FCoE priority advertised for the FCoE protocol in application priority TLVs.
S4810
Syntax fcoe priority-bits priority-bitmap
To remove the configured FCoE priority, use the no fcoe priority-bits command.
Parameters
priority-bitmap
Defaults 0x8
Command Modes PROTOCOL LLDP
Command History
Version 8.3.12.0
Version 8.3.16.0
Usage This command is available at the global level only.
Information

iscsi priority-bits

Configure the iSCSI priority advertised for the iSCSI protocol in application priority TLVs.
S4810
Syntax iscsi priority-bits priority-bitmap
To remove the configured iSCSI priority, use the no iscsi priority-bits command.
Parameters
priority-bitmap
Defaults 0x8
Command Modes PROTOCOL LLDP
Command History
Version 8.3.12.0
Version 8.3.16.0
Usage This command is available at the global level only.
Information
628
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the priority-bitmap range. The range is 1 to FF.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the priority-bitmap range. The range is 1 to FF.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.