Show Boot Bmp - Dell C9000 Series Reference Manual

Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.0)
Example
Dell#rmdir nfsmount:/nfs-mountpoint/guest
Proceed to remove the directory [confirm yes/no]: yes
Dell#
Related mkdir
Commands

show boot bmp

Display the current state of bare metal provisioning (BMP) or the jump-start process.
C9000 Series
Syntax
show boot bmp
Parameters
bmp
Defaults none
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Description
Introduced on the C9010 Series.
Introduced this command.
– creates a directory.
Display the current information on the state of BMP or the
jump-start process.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
File Management 217