Dell C9000 Series Reference Manual page 284

Parameters
prefix-list-name
StartingSeqNum
Step-to-
Increment
Defaults none
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.11.1
8.1.1.0
7.8.1.0
7.6.1.0
7.5.1.0
7.4.1.0
Usage Information When you have exhausted all the sequence numbers, this feature permits re-assigning
a new sequence number to entries of an existing prefix list.
Related resequence access-list
Commands
Enter the name of the configured prefix list, up to 140 characters
long.
Enter the starting sequence number to resequence. The range is
from 0 to 65535.
Enter the step to increment the sequence number. The range is
from 1 to 65535.
EXEC
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the E-Series ExaScale
Increased the name string to accept up to 140 characters. Prior
to 7.8.1.0, names were up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— resequences an access-list.
Access Control Lists (ACL) 284