Dell C9000 Series Reference Manual page 275

Networking command-line reference guide
Hide thumbs Also See for C9000 Series:
Table of Contents

Advertisement

in | out
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Usage Information
show ip
accounting
access-lists
Field
"Extended IP..."
"seq 5..."
"order 4"
Example
Dell#show ip accounting access FILTER1 interface tengig 1/6
Extended IP access list FILTER1
seq 5 deny ip any 191.1.0.0 /16 count (0x00 packets)
seq 10 deny ip any 191.2.0.0 /16 order 4
seq 15 deny ip any 191.3.0.0 /16
For a Port Channel interface, enter the keyword port-
channel then a number. The range is from 1 to 128.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Identify whether ACL is applied on the ingress or egress side.
EXEC
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for the 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
Description
Displays the name of the IP ACL.
Displays the filter. If the keywords count or byte were
configured in the filter, the number of packets or bytes the filter
processes is displayed at the end of the line.
Displays the QoS order of priority for the ACL entry.
Access Control Lists (ACL)
275

Advertisement

Table of Contents
loading

Table of Contents