Dell C9000 Series Reference Manual page 231

configured
status
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Usage Information The status option allows you to display the size and checksum of the running
configuration and the startup configuration.
Example
Dell#show running-config
Current Configuration ...
! Version 9.2(1.0B2)
! Last configuration change at Thu Mar
for the current TFTP configuration
tftp
for the current object tracking
track
configuration
for the current UDF TCAM profiles
udf-tcam
configuration
for the uplink state group configuration
uplink-state-
group
for the current users configuration
users
for the current VLT configuration
vlt
for the current VRF configuration
vrf
for the current Vxlan instances
vxlan
configuration
for the current wred-profile
wred-profile
configuration
(OPTIONAL) Enter the keyword configuration to display line
card interfaces with non-default configurations only.
(OPTIONAL) Enter the keyword status to display the checksum
for the running configuration and the start-up configuration.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
6 02:10:35 2014 by default
File Management 231