Show Os-Version - Dell C9000 Series Reference Manual

show os-version

Display the release and software image version information of the image file specified.
C9000 Series
Syntax
show os-version [file-url]
From a PE console, use show os-version to view the release and software image
information.
Parameters
file-url
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the
relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
(OPTIONAL) Enter the following location keywords and
information:
• For a file on the internal flash, enter flash:// then the
filename.
• For a file on an FTP server, enter ftp://
user:password@hostip/filepath.
• For a file on an NFS-mounted system, enter nfsmount://
<mount-point/filepath>
NOTE: While switching to a remote NFS file system, it
is mandatory to specify the mount-point that indicates
the working directory on the NFS file system. You
cannot enter the root directory of the remote NFS file
system.
• For a file on a TFTP server, enter tftp://hostip/filepath.
• For a file on the USB port, enter usbflash://filepath.
NOTE: The port extender information is displayed only
when the extended bridge feature is enabled.
Description
Introduced on the C9010 and C1048P.
Introduced on the Z9500.
File Management 224