Dot1X Profile - Dell C9000 Series Reference Manual

Use this command in Interface Batch Mode to enable port control on an interface in a
dual-homing setup.

dot1x profile

Configure a dot1x profile to define a list of trusted supplicant MAC addresses.
Syntax
[no] dot1x profile profile-name
Parameters
profile-name
Defaults None
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Error Strings NONE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
Usage Information The dot1x profile command configures a dot1x profile to define a list of trusted
supplicant MAC addresses. Maximum number of dot1x profiles is limited to 10. This
command launches dot1x profile mode for entering profile related commands such as
the mac command. The dot1x static-mab command assigns the dot1x profile to an
interface.
Use this command in Configuration Terminal Batch mode to configure the dot1x
profile in a dual-homing setup.
Related
Commands
Enter a dot1x profile-name. The profile name length is limited
to 32 characters.
Description
Introduced on the S3100 series, S4048–ON, S4048–ON, S4810,
S4820T, S5000, S6000, S6000–ON, the Configuration Terminal
Batch mode on C9010, Z9100–ON, and Z9500.
Introduced on the C9010.
• dot1x static-mab
• mac
802.1X 253