Checking The Environment Switch; Attaching The Label - Canon imageRUNNER 5065 series Service Manual

[1]
2) Connect the 2 connectors [1] of the reader communication cable, and then
fix the cable in place with the wire saddle [2].
3) Connect the connector [1] of the ADF power supply cable.
[1]
4) Connect the 2 connectors of the ADF communication cable.

2.2.11 Checking the Environment Switch

iR5065 / iR 5055 / iR5075 / / /
F-2-39
[1]
[2]
F-2-40
F-2-41
[1]
F-2-42
1) Make settings for environment switch [1] and the cassette heater switch
[2] according to the environment of the installation site. In case the drum/
cassette heaters are required to be turned on while the main power switch
is turned off, make the settings with the following 2 switches:
Drum heater
ON
Environment switch ON
Main power switch ON
Cassette heater
ON
Cassette heater switch ON
Environment switch ON
Main power switch OFF
[2]
O N
[1]

2.2.12 Attaching the Label

iR5065 / iR 5055 / iR5075 / /
<Attaching the cleaning position label>
1) Open the DADF [1].
1) Attach the cleaning position label [2] for the relevant language.
<Attaching the cleaning procedure label>
1) Pull the release lever [1] and open the white sheet [2] in the direction of
the arrow [A].
0015-4667
Chapter 2
OFF
Environment switch OFF
Main power switch OFF
OFF
Cassette heater switch OFF
Environment switch ON
Main power switch ON
F-2-43
[1]
[2]
F-2-44
0015-9830
2-11