Setting Of Environmental Switch - Canon imagePRESS C1 P Service Manual

Chapter 2
MEMO:
The lock hinge cover is easily attached if placing the arm unit [1] at the right
angle to the control panel [2].
[2]
[1]
[2]
27) Attach the lock hinge cover L [1].
- 2 bosses [2]
- 1 screw (TP; M3X8) [3]
[2]
[1]
28) Tilt the control panel [1] in the direction of the arrow.
29) Fit the hinge slide cover [1] in the direction of the arrow.
2-60
[1]
[2]
F-2-189
[3]
F-2-190
[1]
F-2-191
30) Fix the hinge slide cover.
- 2 screws (TP; M3X8) [1]
- 2 cover rubber pieces (Small) [2]
[2]
[3]

2.2.19 Setting of Environmental Switch

imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Check that the Environmental switch [1] is ON.
[1]
2.2.20 Turning the Main Power ON
imagePRESS C1 P / imagePRESS C1
Before turning the main power on, be sure to remove the packing materials.
1) Connect the power cable with the inlet on the main body.
[1]
F-2-192
[1]
F-2-193
ON
ON
F-2-194
[1]
0013-9816
0015-8524