Main Power Switch; Before Removing The Main Power Switch; Removing The Main Power Switch; Heater Switch Pcb - Canon iR C2880 Series Service Manual

[2] [3]
[3]
F-10-106

10.5.19 Main Power Switch

10.5.19.1 Before Removing the Main Power Switch

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Detach the rear upper cover. (page 10-16)[Detaching the Rear Upper
Cover]
2) Detach the rear lower cover. (page 10-17)[Detaching the Rear Lower
Cover]

10.5.19.2 Removing the Main Power Switch

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Remove the main power switch [2] (snap stopper).
- 4 fastons [1]
[2]
[1]
F-10-107
When attaching the 4 fastons, make sure the numbers assigned to the fastons
match the numbers shown in the below picture.
3
[BK]
1
[WH]
2
[WH]
4
[BK]
F-10-108

10.5.20 Heater Switch PCB

10.5.20.1 Before Removing the Heater Switch PCB

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Detach the rear upper cover. (page 10-16)[Detaching the Rear Upper
[2] [3]
[1]
[2] [3]
0014-2616
0014-2617
[1]
0018-2597
Cover]
2) Detach the rear lower cover. (page 10-17)[Detaching the Rear Lower
Cover]

10.5.20.2 Removing the Heater Switch PCB

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) In the case of S3500, detach the environment heater switch cover [1] with
the flat blade screwdriver etc.
[1]
F-10-109
2) Remove the heater switch PCB mount [1].
- 2 screws [2]
- 3 edge saddles [3]
- 5 connectors [4]
[2]
[4]
[3]
[3]
F-10-110
3) Remove the heater switch PCB [1].
- 2 edge saddles [2]
- 1 faston (black) [3]
- 1 faston (white) [4]
- 1 screw [5]
- 2 PCB supports [6]
Chapter 10
0018-2599
[1] [4] [3]
[4] [2]
10-31