Table of Contents
Advertisement
Fixing Assembly
Dirt may adhere to the fixing assembly inside the machine and cause black streaks to appear on printouts. To clean
the fixing assembly, perform the following procedure. Note that you cannot clean the fixing assembly when the
machine has documents waiting to be printed. To clean the fixing assembly, you need A4 or Letter size paper. Set the
paper in the paper drawer or multi-purpose tray before performing the following procedure.
●
Cleaning requires toner. Make sure that there is sufficient toner remaining beforehand.
●
It takes approximately 90 seconds to clean the fixing assembly.
Checking Toner Level(P. 160)
Loading Paper in the Multi-Purpose Tray(P. 25)
1
Press
and tap <Menu>.
2
Tap <Adjustment/Maintenance>.
3
Tap <Clean Fixing Assembly>.
4
Load paper (A4 or LTR) in the multi-purpose tray, and tap <OK>
●
A sheet for cleaning the fixing assembly is printed.
Follow the instructions on the screen to place the sheet for cleaning with the side to be printed face up in
the multi-purpose tray, and then press <OK>.
Maintenance
157
3EEJ-038
<Start>.
- Quick Links:
- Printing from a Computer
Hide quick links:
Advertisement
Table of Contents
