Iq13 Partial Blank Image (Not Periodic) Rap; Iq14 Partial Blank Image (Periodic) Rap - Xerox phaser 3635 Service Manual

IQ13 Partial Blank Image (Not Periodic) RAP

Use this RAP when the printed sheets have blank areas, that do not form a regular pattern.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Perform the following:
1. Install a new print cartridge, PL 9.10 Item 1.
Draft 4
Phaser 3635MFP

IQ14 Partial Blank Image (Periodic) RAP

Use this RAP when the printed sheets have blank areas that form a regular, or repeated,
defect.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Perform the following:
1. Measure the distance between the image and the defect. Refer to Table 1 to determine
the possible cause of the defect.
Table 1 Defect distance
Defect distance Roll
95mm (3.7 inches) Xerographic drum
38mm (1.5 inches) Charge roll
45mm (1.8 inches) Supply roll
47mm (1.9 inches) Transfer roll
89mm (3.5 inches) Heat roll
51mm (2 inches) Pressure roll 1
64mm (2.5 inches) Pressure roll 2
2. Install new components as necessary.
3-15
WARNING
Component Parts List Ref.
Print cartridge PL 9.10 Item 1
Print cartridge PL 9.10 Item 1
Print cartridge PL 9.10 Item 1
Transfer roll PL 9.10 Item 2
Fuser assembly PL 10.15 Item 1
Fuser assembly PL 10.15 Item 2
Fuser assembly PL 10.15 Item 3
Image Quality
IQ13, IQ14