Saving And Recalling Instrument States; Places Where You Can Save; What You Can Save To The Analyzer's Internal Memory; Whatyoucansavetoafloppydisk - Agilent Technologies 8719D User Manual

Saving and Recalling Instrument States

analyzer internal memory
n
floppy disk using the analyzer's internal disk drive
n
floppy disk using an external disk drive
n
IBM compatible personal computer using HP-IB mnemonics
n
The number of registers that the analyzer allows you to save depends on the size of associated
error-correction sets, and memory traces. Refer to the "Preset State and Memory Allocation"
chapter for further information.
You can save instrument states in the analyzer internal memory, along with the following list of
analyzer settings. The default illenames are REG<OlSl>.
error-corrections on channels 1 and 2
n
displayed memory trace
n
print/plot definitions
n
measurement setup
n
number of points
q
When the ac line power is switched off, the internal non-volatile memory is
retained by a battery. The data retention time with the 3 V, 1.2 Ah battery is
as follows:
Temperature at 70 OC . . . , . . . . . . . . . . . . . . .250 days (0.68 year) characteristically
Temperature at 40 OC . . . . . . . . . . . . , . . . . .1244 days (3.4 years) characteristically
Temperature at 25 OC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 years characteristically
You can save an instrument state and/or measurement results to a disk. The default filenames
are F'ILEn, where n gets incremented by one each time a file with a default name is added to
the directory. The default filenames for data-only iiles are DATAnDn (DATAn.Dn for DOS),
where the first n is incremented by one each time a iile with a default name is added to the
directory. The second n is the channel where the measurement was made. When you save a
settings listed above for internal memory
all
n
active error-correction for the active channel only
n
displayed measurement data trace
n
displayed user graphics
n
data only
n
HPGL plots
n
Printing, Platting, and Saving Measurement Results 4 3 3