Saving And Recalling Instrument States; Places Where You Can Save; What You Can Save To The Analyzer's Internal Memory - Agilent Technologies 8753ET User Manual

Saving and Recalling Instrument States

Places Where You Can Save

• analyzer internal memory
• floppy disk using the analyzer's internal disk drive
• floppy disk using an external disk drive
• IBM compatible personal computer using GPIB mnemonics

What You Can Save to the Analyzer's Internal Memory

The number of registers that the analyzer allows you to save depends on the size of
associated error-correction sets, and memory traces. However, the maximum number of
registers that can be saved to internal memory is 31. Refer to the "Preset State and
Memory Allocation" chapter of the reference guide for further information.
You can save instrument states in the analyzer internal memory, along with the following
list of analyzer settings. The default file names are REG<01-31>.
• error-corrections on channels 1 and 2
• displayed memory trace
• print/plot definitions
• measurement setup
frequency range
number of points
sweep time
output power
sweep type
measurement parameter
When the ac line power is switched off, the internal non-volatile memory is
NOTE
retained by a battery. Refer to "Specifications and Characteristics" in the
reference guide for data retention times.
Printing, Plotting, and Saving Measurement Results
Saving and Recalling Instrument States
4-39