Monitoring System Log Messages; Table 89: Summary Of Key Alarm Output Fields - Juniper EX4300 Hardware Manual

Meaning

Table 89: Summary of Key Alarm Output Fields

Field Values
Type Category of the alarm:
Severity Alarm severity—either major (red) or minor (yellow).
Description Brief synopsis of the alarm.
Time Date and time when the failure was detected.
Related
Documentation

Monitoring System Log Messages

Purpose
Action
Copyright © 2015, Juniper Networks, Inc.
NOTE: When the switch is reset, the active alarms are displayed.
Table 89 on page 259 lists the alarm output fields.
Chassis—Indicates an alarm condition on the chassis (typically an environmental alarm such as
one related to temperature).
System—Indicates an alarm condition in the system.
Monitoring System Log Messages on page 259
Dashboard for EX Series Switches on page 61
Understanding Alarm Types and Severity Levels on EX Series Switches on page 257
NOTE: This topic applies only to the J-Web Application package.
Use the monitoring functionality to filter and view system log messages for EX Series
switches.
To view events in the J-Web interface, select
Apply a filter or a combination of filters to view messages. You can use filters to display
relevant events. Table 90 on page 260
the associated actions.
To view events in the CLI, enter the following command:
show log
Chapter 21: Alarms and Syslog Messages
>
Monitor Events and Alarms
describes the different filters, their functions, and
> .
View Events
259