Meaning
Table 52: Summary of Key Alarm Output Fields
Field
Values
Type
Category of the alarm:
Severity
Alarm severity—either major (red) or minor (yellow).
Description
Brief synopsis of the alarm.
Time
Date and time when the failure was detected.
Related
Documentation
Monitoring System Log Messages
Purpose
Action
Copyright © 2016, Juniper Networks, Inc.
NOTE:
When the switch is reset, the active alarms are displayed.
Table 52 on page 205
lists the alarm output fields.
Chassis—Indicates an alarm condition on the chassis (typically an environmental alarm such as
one related to temperature).
System—Indicates an alarm condition in the system.
Monitoring System Log Messages on page 205
Dashboard for EX Series Switches on page 25
Understanding Alarm Types and Severity Levels on EX Series Switches on page 197
NOTE:
This topic applies only to the J-Web Application package.
Use the monitoring functionality to filter and view system log messages for EX Series
switches.
To view events in the J-Web interface, select
Apply a filter or a combination of filters to view messages. You can use filters to display
relevant events.
Table 53 on page 206
the associated actions.
To view events in the CLI, enter the following command:
show log
Chapter 18: Alarms and Syslog Messages
>
Monitor
Events and Alarms
describes the different filters, their functions, and
>
.
View Events
205