Management Port Leds On A Qfx5100 Device; Figure 19: Management Port Leds On A Qfx5100 Switch - Juniper QFX5100 Hardware Manual

QFX5100 Switch Hardware Guide

Management Port LEDs on a QFX5100 Device

36
The management ports (labeled
Base-T and SFP 1000 Base-X connections) on a QFX5100 switch have two LEDs that
indicate link status and link activity (see
status; the right LED indicates link/activity.

Figure 19: Management Port LEDs on a QFX5100 Switch

1— Status LEDs
2— em1–SFP management Ethernet port (C1)
Cage (socket for either 10/100/1000 Base-T
RJ45 SFP or 1GbE fiber SFP)
3— Reset
button, see caution statement below
CAUTION: Do not use the
under the direction of Juniper Networks Technical Assistance Center (JTAC).
for 10/100/1000 Base-T and
C0
Figure 19 on page 36). The left LED indicates
4— em0–RJ-45 (10/100/1000 Base-T)
management Ethernet port (C0)
5— RJ-45 console port (CON)
6— USB port
button to restart the power sequence unless
Reset
Copyright © 2017, Juniper Networks, Inc.
for 10/100/1000
C1