Port Panel Of A Qfx5100-24Q Device; Figure 9: Qfx5100-24Q Device Port Panel - Juniper QFX5100 Hardware Manual

QFX5100 Switch Hardware Guide
Table 4: Physical Specifications for the QFX5100 Switch Chassis (continued)
Product SKU Height
QFX5100-96S 3.46 in. (8.8 cm)
Related
Documentation

Port Panel of a QFX5100-24Q Device

16
Width
17.36 in. (44.1 cm)
Rack Requirements for a QFX5100 Device on page 69
Cabinet Requirements for a QFX5100 Device on page 71
Mounting a QFX5100 Device in a Rack or Cabinet on page 99
Installing and Connecting a QFX5100 Device on page 97
Installing and Removing QFX5100 Device Hardware Components on page 137
The port panel of the QFX5100-24Q device consists of 24 quad small-form factor
pluggable plus (QSFP+) ports. Each QSFP+ socket can be configured to support 40 GbE
or as a set of 4 independent 10 GbE ports using breakout cables (channelization mode).
In standalone mode, any of the 24 ports
or access ports. The QFX5100-24Q device has two module bays for the optional expansion
modules, QFX-EM-4Q or EX4600-EM-8F. The QFX-EM-4Q, can add a total of 8 additional
QSFP+ ports to the chassis and the EX4600-EM-8F can provide 8 additional 10-Gigabit
Ethernet Enhanced Small Form-Factor Pluggable (SFP+) ports. The QFX-EM-4Q ports
can also be configured as either access ports or as uplinks, but only ports 0 and 2 can be
channelized using port mode.
QFX5100-24Q device.

Figure 9: QFX5100-24Q Device Port Panel

1— Electrostatic Discharge (ESD) terminal
2—QSFP+ access interface or uplink ports (24)
This topic describes:
Switch Ports on page 17
QFabric Systems on page 17
Channelizing Interfaces (Non-QFabric) on page 18
Virtual Chassis and Virtual Chassis Fabric on page 18
Port LEDs on page 19
Depth
22.44 in. (57 cm) (not
including handles for
Fans and PSUs)
0 through 23 can be configured as either uplink
Figure 9 on page 16 shows the port panel of the
3— Expansion module bays with cover panels
(2)
Copyright © 2017, Juniper Networks, Inc.
Weight
With FRUs installed: 32 lbs
(14.5 kg)