Line Card Led In An Ex9200 Switch; Network Port Leds On Line Cards In An Ex9200 Switch - Juniper EX9214 Hardware Manual

Line Card LED in an EX9200 Switch

The line cards in EX9200 switches have an LED labeled OK/FAIL on the faceplate that indicates the
online status information of line cards.
Table 39 on page 109 describes the LED on line cards for EX9200 switches, its colors and state, and the
status it indicates. For information about the LEDs on the EX9200-15C line card, see
Card" on page 96.
Table 39: LED on Line Cards for EX9200 Switches
LED Color
OK/FAIL Green
Unlit
Red

Network Port LEDs on Line Cards in an EX9200 Switch

Each SFP, SFP+, QSFP+, CFP, and RJ-45 port on the faceplate of line cards has an LED, the Link/Activity
LED, which indicates the link status and activity on the port. Each RJ-45 port has an additional LED, the
Status LED, which indicates the status of the port parameters.
Table 40 on page 110 describes the Link/Activity LED. For information about the LEDs on the
EX9200-15C line card, see
State and Description
•
On steadily—The line card is functioning normally.
•
Blinking—The line card is transitioning online or offline.
The line card is not online.
The line card has failed.
"EX9200-15C Line Card" on page 96.
"EX9200-15C Line
109