Installing The Ex4600 Device; Installing And Connecting An Ex4600 Switch - Juniper EX4600 Series Hardware Manual

CHAPTER 16

Installing the EX4600 Device

Installing and Connecting an EX4600 Switch

Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
Installing and Connecting an EX4600 Switch on page 139
Unpacking an EX4600 Switch on page 140
Mounting an EX4600 Switch in a Rack or Cabinet on page 141
You can mount an EX4600 switch:
Flush with the front of a 19-in. four-post rack. Use the standard mounting brackets
provided with the switch for this configuration.
Recessed 2 in. (5 cm) from the front of a 19-in. four-post rack. Use the extension bracket
provided in the standard mounting kit for this configuration. Recessed mounting is
primarily used in enclosed cabinets.
To install and connect an EX4600 switch:
Follow the instructions in
1.
Determine how the switch is to be mounted.
2.
Flush or recessed mounted in a rack or cabinet, see
a Rack or Cabinet" on page
Follow the instructions in:
3.
Connecting Earth Ground to an EX4600 Switch on page 146
a.
Connecting DC Power to an EX4600 Switch on page 149
b.
Configuring an EX4600 Switch on page 159
c.
Rack Requirements for an EX4600 Switch on page 39
Cabinet Requirements for an EX4600 Switch on page 40
Clearance Requirements for Airflow and Hardware Maintenance for an EX4600 Switch
on page 41
"Unpacking an EX4600 Switch" on page
"Mounting an EX4600 Switch in
141.
140.
139