Chapter 2 Installing The Device - Juniper 200 Series User Manual

Chapter 2
Installing the Device
This chapter describes how to install a device in an equipment rack or on a desktop, and
how to connect the device to other devices.
Topics in this chapter include:
• "General Installation Guidelines" on page 10
• "Performing Equipment-Rack Installation" on page 10
-
-
-
• "Connecting the Power" on page 11
• "Wiring a DC Power Supply" on page 12
•
"Connecting the NetScreen-200 Device to Other Devices" on page 13
Note: For safety warnings and instructions, please refer to the NetScreen Safety Guide.
The instructions in this guide warn you about situations that could cause bodily injury.
Before working on any equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents.
NetScreen-200 Series
"Equipment Rack Installation Guidelines" on page 10
"Front Mount" on page 11
"Mid-Mount" on page 11
2
9