Installing A Qfx3500 Switch; Installing And Connecting A Qfx3500 Device - Juniper QFX5110 Series Hardware Documentation

CHAPTER 25

Installing a QFX3500 Switch

IN THIS CHAPTER

Installing and Connecting a QFX3500 Device | 326

Unpacking a QFX3500 Device | 327
Mounting a QFX3500 Device in a Rack or Cabinet | 328
Connecting Earth Ground to a QFX3500 Device | 334
Connecting AC Power to a QFX3500, QFX3600, or QFX3600-I Device | 336
Connecting DC Power to a QFX3500, QFX3600, or QFX3600-I Device | 338
Connecting a QFX Series Device to a Management Console | 343
Connecting QFX Series and EX Series Switches in a QFX Virtual Chassis | 345
Connecting a QFX3500 Device to a Network for Out-of-Band Management | 351
Installing and Connecting a QFX3500 Device
To install and connect a QFX3500 device:
1. Follow the instructions in
2. Mount the device by following the instructions in
on page 328.
3. Follow the instructions in
4. Follow the instructions in
page 309.
5. Depending on how you will be using the QFX3500 device, do one of the following:
If you are using the QFX3500 device as a standalone switch, follow the instructions in Configuring a
QFX3500 Device as a Standalone Switch.
"Unpacking a QFX3500 Device" on page
"Mounting a QFX3500 Device in a Rack or Cabinet"
"Connecting Earth Ground to a QFX3500 Device" on page
"Connecting AC Power to a QFX3500, QFX3600, or QFX3600-I Device" on
327.
334.
326