Ac Power Cord Specifications For Qfx10002 Switches - Juniper QFX10002 Hardware Manual

Table 21: AC Power Specifications for a QFX10002 Switch
Item
Maximum power consumption

AC Power Cord Specifications for QFX10002 Switches

Detachable AC power cords are shipped with the chassis, if you include them as part of your order. The
coupler is type C13 as described by International Electrotechnical Commission (IEC) standard 60320.
The plug end of the power cord fits into the power source outlet that is standard for your geographical
location.
NOTE: In North America, AC power cords must not exceed 14.75 feet (approximately 4.5 meters)
in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and
210-52, and Canadian Electrical Code (CEC) Section 4-010(3). The cords that can be ordered for
the QFX Series switches are in compliance.
The following tables list AC power cord specifications provided for each country or region.
Table 22: AC Power Cord Specifications for QFX10002-60C Switches
Country/ Electrical Specifications
Region
Australia 250 VAC, 10 A, 50 Hz
China 250 VAC, 10 A, 50 Hz
(Continued)
Specification
•
1425 W for QFX10002-72Q
•
1824 W for QFX10002-60C
•
800 W for QFX10002-36Q
Plug Standards Shipped
Juniper
Model
Number
AS/NZ CG_CBL-
3109-1996 C13-09-AU
GB 1002-1996 CG_CBL-
C13-09-CH
Spare Juniper Graphic
Model Number
CBL-EX-PWR-
C13-AU
CBL-EX-PWR-
C13-CH
53