Dc Power Supply Leds On A Qfx3500, Qfx3600, Or Qfx3600-I Device - Juniper QFX5110 Series Hardware Documentation

DC Power Supply LEDs on a QFX3500, QFX3600, or QFX3600-I Device

Figure 196 on page 525
Figure 196: DC Power Supply Faceplate on a QFX3500, QFX3600, or QFX3600-I Device
2
8 7
1 Shunt positive input terminals
—
2 Shunt negative input terminals
—
3 Terminal block
—
4 Ejector lever
—
CAUTION:
The same polarity terminal can be wired together from the same source to provide an
additional current path in a higher power chassis. Do not connect the terminals to
different sources.
Table 95 on page 526 describes the LEDs on the DC power supplies.
shows the location of the LEDs on the DC power supply.
1
6 5
The V+ terminals are shunted internally together, as are the V- terminals.
3
4
5 ESD grounding point
—
6 Fault LED
—
7 Output LED
—
8 Input LED
—
525