Avaya S8700 Maintenance Manual page 2260

Maintenance-Object Repair Procedures
Test command for the system links, test sys-link UUCSSpp can be specified with
current or faulted as an optional argument if the user wishes to test every
component in the specified path. The tests executed will be the same if the user
were to test each component manually. In the event that the user does not
specify any path, then only the tests specified for the system links are executed.
Order of Investigation
System Link Status (#985)
1. D = Destructive, ND = Nondestructive
System Link Status (#985)
This test is nondestructive. This test queries the switch for the status of the
system link and verifies that every switch component has the same view of the link
state.
Table 8-596. TEST #985 System Link Status
Error Test
Code Result Description / Recommendation
1007 ABORT Could not locate the system link associated with this location
1. Retry the command at 1-minute intervals up to 5 times.
2500 ABORT Internal system error
1. Retry the command at 1-minute intervals up to 5 times.
6 FAIL The system link is down.
1. Follow the procedure for Error Type 13.
PASS The system link is up.
8-1538 Issue 1 May 2002
Short Test Long Test
Sequence Sequence
X X
1
D/ND
ND
555-233-143