Maintenance-Object Repair Procedures
Test Synchronization Test (#417)
This test updates every Synchronization Maintenance component with the correct
information about its role in providing a system's synchronization. Specifically,
this test updates every:
IPSI circuit pack's Tone-Clock circuit
Tone-Clock, Expansion Interface, DS1 Interface, and UDS1 Interface
circuit pack
in the system. The test either passes or aborts.
Table 8-594. Test #n (Name of) Test
Error
Test
Code
Result
Description / Recommendation
1000
ABORT
System resources required to run this test are not available.
1. Retry the command at 1-minute intervals up to 3 times.
1115
ABORT
Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 3 times.
2500
ABORT
Internal system error
1. Retry the command at 1-minute intervals up to 3 times.
PASS
The Synchronization Maintenance component circuit-pack parameters have
been successfully updated. The system should be synchronized after
successful execution of this test. If synchronization problems still exist, refer to
the Error Log to obtain information about the source of the problem.
8-1532
Issue 1 May 2002
Continued on next page
555-233-143