Avaya S8700 Maintenance Manual page 2265

For multi-connect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

SYS-PRNT (System Printer)
Link Retry Test (#215)
This test sends a message to the System Printer management software process
instructing it to make a data call to the extension connected to the printer. If the
System Printer link is already up, this test passes without making any data call.
Table 8-599. TEST #215 Link Retry Test
Error
Test
Code
Result
Description / Recommendation
10, 20
ABORT
Internal system error.
1. Retry the command at 1-minute intervals up to two times.
30
ABORT
Internal system error.
1. See
1010
ABORT
The System Printer Link has been busied out.
1. Enter the release sp-link command to release the System Printer Link
2. Reissue the test sp-link long command to execute the test.
2012
ABORT
Internal system error.
1. Retry the command at 1-minute intervals up to five times.
FAIL
The System Printer Link CANNOT be established.
1. See
PASS
The System Printer Link is up.
555-233-143
''Procedures for Restoring the System Printer Link'' on page 8-1540
for recommended maintenance strategy.
from the busyout state.
''Procedures for Restoring the System Printer Link'' on page 8-1540
for recommended maintenance strategy.
Continued on next page
Issue 1 May 2002
8-1543

Advertisement

Table of Contents
loading

Table of Contents