Avaya S8700 Maintenance Manual page 2393

TONE-BD (Tone-Clock Circuit)
Error Log Entries and Test to Clear Values
Table 8-648. Tone-Clock Circuit Pack Error Log Entries
Error Aux
Type Data Associated Test
1
0 0 Any
1 (a) 0 Circuit pack removed or
SAKI Sanity test (#53)
18 (b) 0 busyout tone-clock PC WARNING OFF
23 (c) 0 None
125 (d) None
126 (e) None
257 (f) 65535 Control Channel test
(#52)
257 (f) Any None
513 (g) Any None
769 (h) 4358 None
1025 (i) 4363 NPE Audit test (50)
1538 (j) Any None
2049 (k) 0 Clock Health Inquiry test
(#46)
2305 (k) 0 Clock Health Inquiry test
(#46)
2561 (l) Any None
3329 0 None
(m)
3840 (n) Any None
3848 (o) 0 Clock Health Inquiry test
(#46)
3856 (p)
3857, NONE
3858 (q)
3872 (r) 0 None
3999 (s) Any None
1. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate
test's description, and follow its recommended procedures.
2. Minor alarms on this MO may be downgraded to Warning alarms based on the value used in the set options
command.
3. For a TN2312 IPSI-supported port network, use the command set ipserver-interface.
555-233-143
Alarm On/Off
Level Board Test to Clear Value
Any Any test tone-clock PC sh
MINOR ON
release tone-clock PC
WARNING OFF
MINOR ON
MINOR ON
MINOR ON test tone-clock PC r 20
test tone-clock PC sh
MINOR ON
MAJOR ON set tone-clock UC override
MAJOR ON set tone-clock UC override
MAJOR ON
MINOR/ OFF set tone-clock UC override
WARNING
2
set tone-clock UC override
MAJOR ON set tone-clock UC override
MAJOR ON busyout/release
ipserver-interface
set tone-clock UC override
Issue 1 May 2002
3
3
3
3
3
3
8-1671