Time-Day (Time Of Day) - Avaya S8700 Maintenance Manual

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Maintenance-Object Repair Procedures

TIME-DAY (Time of Day)

MO's Name (in

The time of day contains the current year, month, day of the week, day of the

month, hour, minute, and second. The Time of Day MO is responsible for

monitoring the time-of-day clock and raising an alarm if the time-of-day clock is

not set or cannot be read by the software. If the time-of-day clock is not set or

cannot be read by the software, many features such as Time-of-Day Routing,

CDR, ISDN Call-by-Call, duplication, and so on will be either inoperative or

incorrect. The time-of-day clock should be set using the set time command

whenever the system is initially powered up.

The time-of-day clock can be read with the display time command and set via the

set time command. The time-of-day clock has a backup battery to save the time

of day during power failures.

Error Log Entries and Test to Clear Values

Table 8-645. Time-of-Day Error Log Entries

Associated Test

This error indicates that software cannot read the time-of-day clock. During this condition, every time stamp

in Alarm Log entries, Hardware Error Log entries, and Software Error Log entries is potentially inaccurate.

In addition, any features that are sensitive to the time of day (such as SMDR, Time-of-Day Routing, ISDN

Call-by-Call) will not function correctly.

To resolve the alarm, do the following:

1. Use the set time command to set the time of day.

2. Use the display time command to display the time of day. If the time of

day is displayed correctly, wait 15 minutes and verify that the alarm is

Issue 1 May 2002

Initial SAT Command

Full Name of MO

Test to Clear Value

display time