Analog Devices ADSP-BF506F Hardware Reference Manual page 1070

Functional Description
SCLK
Trigger
ETIME3
ACMTMR0
CS
ADC
Controls
Figure 22-7. Mode Of Operation
There are, however, no restrictions on the order of the different events.
can be greater than
ACM_ET0
and can be equal to
ACM_ET0
greater than the value in
tiple events have the same event time values, for example the value in
is equal to the value in
ACM_ET0
ing to their priorities. Event 0 has the highest priority. So, when event 0
and event 3 share the same event time value, the timing generation unit
processes event 0 while event 3 is missed. The event 3 missed (EM3) sta-
tus bit is set in the missed event status register (
is set in the
ACM_STAT
22-16
Event[0] Event[3]
,
ACM_ET3 ACM_ET0
. When the value in
ACM_ET3
, event 0 occurs after event 3. When mul-
ACM_ET3
ACM_ET3
register, indicating that an event has been missed. In
ADSP-BF50x Blackfin Processor Hardware Reference
can be less than
ACM_ET0
, the events are processed accord-
), and the
ACM_MS
Event[0]
,
ACM_ET3
is
bit
EMISS