Using The Keyword No Command - Dell MXL 10GbE Reference Manual

Key Combination Action
CNTL-R Re-enters the previous command.
CNTL-U Deletes the line.
CNTL-W Deletes the previous word.
CNTL-X Deletes the line.
CNTL-Z Ends continuous scrolling of the command outputs.
Esc B Moves the cursor back one word.
Esc F Moves the cursor forward one word.
Esc D Deletes all the characters from the cursor to the end of the word.

Using the Keyword no Command

To disable, delete or return to default values, use the no form of the commands.
For most commands, if you type the keyword no in front of the command, you disable that command or
delete it from the running configuration. In this guide, the no form of the command is described in the
Syntax portion of the command description. For example:
Syntax
no {boot | default | enable | ftp-server | hardware | hostname
| ip | line | logging | monitor | service | io-aggregator
broadcast storm-control | snmp-server | username}
Defaults None
Command CONFIGURATION
Modes
Command
Version 8.3.17.0
History
Filtering show Commands
To find specific information, display certain information only or begin the command output at the first
instance of a regular expression or phrase, you can filter the display output of a show command.
When you execute a show command, and then enter a pipe ( | ), one of the following parameters, and a
regular expression, the resulting output either excludes or includes those parameters.
NOTE: The Dell Networking Operating System (OS) accepts a space before or after the pipe, no
space before or after the pipe, or any combination. For example: Dell#command | grep
gigabit |except regular-expression | find regular-expression.
displays only the text that does not match the pattern (or regular expression)
except
CLI Basics
Supported on the M I/O Aggregator.
53