Show Classofservice Dot1P-Mapping - Dell N1100-ON Reference Manual

Class Name
------------------------------- ----- ----- -----------------------------
ipv4
ipv6
stop_http_class
match_icmp6
console#show class-map ipv4
Class Name..................................... ipv4
Class Type..................................... All
Class Layer3 Protocol.......................... ipv4
Match Criteria
---------------------------- -------------------------------------
Source IP Address
console#show class-map stop_http_class
Class Name..................................... stop_http_class
Class Type..................................... All
Class Layer3 Protocol.......................... ipv6
Match Criteria
---------------------------- -------------------------------------
Source IP Address
Source Layer 4 Port

show classofservice dot1p-mapping

Use the show classofservice dot1p-mapping command to display the current
IEEE 802.1p priority mapping to internal traffic classes for a specific
interface.
Syntax
show classofservice dot1p-mapping [{gigabitethernet unit/slot/port | port-
channel port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet unit/slot/port}]
Type Proto
All ipv4
All ipv6
All ipv6
All ipv6
Values
2.2.2.2 (255.255.255.0)
Values
2001:DB8::0/32
80(http/www)
Layer 2 Switching Commands
Reference Class Name
711