Table of Contents
Advertisement
6.2.3.1
show port vlan
Use this command to display which VLANs are on one or all port VLAN lists.
show port vlan [port_string]
Syntax Description
port_string
Command Defaults
If port _string is not specified, all port VLAN information will be displayed.
Command Mode
Read-Only.
Example
This example shows that the Gigabit Ethernet front panel ports 1 through 5 are on the port VLAN
list of VLAN 1.
Matrix>show port vlan ge.0.1-5
Port ge.0.1 has a port VLAN index of 1.
Port ge.0.2 has a port VLAN index of 1.
Port ge.0.3 has a port VLAN index of 1.
Port ge.0.4 has a port VLAN index of 1.
Port ge.0.5 has a port VLAN index of 1.
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
(Optional) Specifies the port(s) for which to display
VLAN lists. For a detailed description of possible
port_string values, refer to
Matrix E1 Series (1G694-13) Configuration Guide
802.1Q VLAN Configuration
Section
4.1.2.
6-13
Advertisement
Table of Contents
