Service-Class Bandwidth-Percentage - Dell Force10 Z9000 Reference Manual

Parameters
kbps
rate
burst-KB
Defaults Granularity for rate is Mbps unless you use the kbps option.
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.6.1.0
pre-Version
6.1.1.1
Usage On 40-port 10G linecards, if the traffic is shaped between 64 and 1000 Kbs, for some values, the
Information shaped rate is much less than the value configured. Do not use values in this range for 10G
interfaces.
Related rate-shape
Commands

service-class bandwidth-percentage

Specify a minimum bandwidth for queues.
C-Series, S-Series, Z-Series
Syntax service-class bandwidth-percentage queue0 number queue1 number
queue2 number queue3 number
Parameters
number
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
1186
Enter the keyword kbps to specify the rate limit in Kilobits per
second (Kbps). On C-Series and S-Series, make the following value a
multiple of 64. The range is 0 to 10000000. The default granularity is
Megabits per second (Mbps).
Enter the outgoing rate in multiples of 10 Mbps. The range is 10 to
10000.
(OPTIONAL) Enter the burst size in KB. The range is 0 to 10000. The
default is 10.
Introduced on the Z9000.
Introduced on the S4810.
Added the kbps option on the C-Series, E-Series, and S-Series.
Introduced on the S-Series and C-Series.
Introduced on the E-Series.
– shapes traffic output as part of the designated policy.
Enter the bandwidth-weight, as a percentage. The value must be a
power of 2. The range is 1 to 1024.
Introduced on the Z9000.