Show Port Monitoring Status - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show port monitoring status

Displays port monitoring status.
show port monitoring status [port_monitor_sessionid]
Syntax Definitions
port_monitor_sessionid
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If a port monitoring session identifier is not specified with this command, then all port monitoring sessions
are displayed.
Examples
-> show port monitoring status
Session Monitor
slot/port
----------+----------+----------+--------------+----------+--------------------
1. 1/ 9
output definitions
Session
Monitor slot/port
Monitor Direction
Overwrite
Operating Status
Admin Status
Release History
Release 6.6.1; command was introduced.
page 34-12
Monitoring session identifier.
Monitor Overwrite
Direction
Bidirectional ON
The port monitoring session identifier.
The location of the monitored port.
The direction of the monitoring session, which can be bidirectional
(the default), inport, or outport.
Whether files created by a port monitoring session can be overwritten.
The default is ON.
The current operating status of the port monitoring session (on/off).
The current administrative status of the port monitoring session (on/
off).
OmniSwitch 6250 CLI Reference Guide
Port Mirroring and Monitoring Commands
Operating Admin
Status Status
ON ON
November 2009