Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 4

•
•
•
•
•
•
•
•
•
•
•
•
•
•
4
Chapter 9, ":CALibrate Commands," starting on page 253, describes
utility commands for determining the state of the calibration factor
protection button.
Chapter 10, ":CHANnel<n> Commands," starting on page 263, describes
commands that control all oscilloscope functions associated with
individual analog channels or groups of channels.
Chapter 12, ":DEMO Commands," starting on page 293, describes
commands that control the education kit (Option EDU) demonstration
signals that can be output on the oscilloscope's Demo 1 and Demo 2
terminals.
Chapter 13, ":DIGital<d> Commands," starting on page 301, describes
commands that control all oscilloscope functions associated with
individual digital channels.
Chapter 14, ":DISPlay Commands," starting on page 309, describes
commands that control how waveforms, graticule, and text are displayed
and written on the screen.
Chapter 15, ":DVM Commands," starting on page 323, describes
commands that control the optional DSOXDVM digital voltmeter analysis
feature.
Chapter 16, ":EXTernal Trigger Commands," starting on page 331,
describes commands that control the input characteristics of the
external trigger input.
Chapter 17, ":FUNCtion<m> Commands," starting on page 337, describes
commands that control math waveforms.
Chapter 18, ":HARDcopy Commands," starting on page 369, describes
commands that set and query the selection of hardcopy device and
formatting options.
Chapter 19, ":LISTer Commands," starting on page 387, describes
commands that turn on/off the Lister display for decoded serial data
and get the Lister data.
Chapter 20, ":MARKer Commands," starting on page 391, describes
commands that set and query the settings of X- axis markers (X1 and
X2 cursors) and the Y- axis markers (Y1 and Y2 cursors).
Chapter 21, ":MEASure Commands," starting on page 407, describes
commands that select automatic measurements (and control markers).
Chapter 22, ":MEASure Power Commands," starting on page 485,
describes measurement commands that are available when the
DSOX4PWR power measurements and analysis application is licensed
and enabled.
Chapter 23, ":MTESt Commands," starting on page 507, describes
commands that control the mask test features provided with
Option LMT.
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide