Measure:ppulses - Agilent Technologies Infiniium 90000 Series Programmer's Manual

25
Measure Commands

:MEASure:PPULses

Command
:MEASure:PPULses <source>
The :MEASure:PPULses measures the number of positive pulses on the
screen.
<source> the source on which the measurement is made
Example This example measures the number of positive pulses on channel 1.
myScope.WriteString ":MEASURE:PPULses CHAN1"
Query

:MEASure:PPULses?

This query returns the result for the PPULses measurement.
604 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference