Vertical Controls; Channel Selection For Waveform Display; Figure 3-1 Scope Menu Display With Displayed Of Both Channels Display - Agilent Technologies U1602A User's And Service Manual

3 Using the Scope Functions

Vertical Controls

Each channel consists of vertical control setting in the scope menu of each
respective channel. This section describes the vertical channel controls for
each channel.

Channel Selection for Waveform Display

The default configuration setting of the instrument enables the waveform
display for vertical channel 1. You can enable either one channel or both
channels simultaneously. The following steps show how to enable the
waveform or disable it from the display.
1 Press

Figure 3-1 Scope menu display with displayed of both channels display.

54
button on front panel to access Scope menu. You will see
the following scope menu display in Figure 3- 1., which shows both
channels disabled.
Agilent U1602A/U1604A User's and Service Guide