Acquire:segmented:analyze - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:ACQuire:SEGMented:ANALyze

Command Syntax
:ACQuire:SEGMented:ANALyze
This command is available when the segmented memory option (Option SGM) is enabled.
N O T E
This command calculates measurement statistics and/or infinite
persistence over all segments that have been acquired. It corresponds to
the front panel Analyze Segments softkey which appears in both the
Measurement Statistics and Segmented Memory Menus.
In order to use this command, the oscilloscope must be stopped and in
segmented acquisition mode, with either quick measurements or infinite
persistence on.
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
":ACQuire:MODE" on page 231
":ACQuire:SEGMented:COUNt"
"Introduction to :ACQuire Commands"
on page 234
on page 227
7
:ACQuire Commands
233