[65] Tunnel-Medium-Type; [66] Tunnel-Client-Endpoint - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual
Software for e series broadband services routers broadband access configuration guide
Hide thumbs
Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12:
- Configuration manual (750 pages)
Table of Contents
Advertisement
JunosE 11.3.x Broadband Access Configuration Guide
radius include tunnel-medium-type
radius include tunnel-client-endpoint
208
Use to include the Tunnel-Type attribute in Access-Request, Acct-Start, and Acct-Stop
messages.
You can control inclusion of the Tunnel-Type attribute by enabling or disabling this
command.
See radius include
Example
host1(config)#radius include tunnel-type access-request enable
Use the no version to restore the default, enable.
[65] Tunnel-Medium-Type
Use the following command to manage the Tunnel-Medium-Type RADIUS attribute.
radius include tunnel-medium-type
Use to include the Tunnel-Medium-Type attribute in Access-Request, Acct-Start, and
Acct-Stop messages.
You can control inclusion of the Tunnel-Medium-Type attribute by enabling or disabling
this command.
See radius include
Example
host1(config)#radius include tunnel-medium-type acct-start enable
Use the no version to restore the default, enable.
[66] Tunnel-Client-Endpoint
Use the following command to manage the Tunnel-Client-Endpoint RADIUS attribute.
radius include tunnel-client-endpoint
Use to include the Tunnel-Client-Endpoint attribute in Access-Request, Acct-Start,
and Acct-Stop messages.
You can control inclusion of the Tunnel-Client-Endpoint attribute by enabling or
disabling this command.
See radius include
Example
host1(config)#radius include tunnel-client-endpoint acct-start enable
Use the no version to restore the default, enable.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Troubleshooting
